|
|
|
|
HEAVY HARROWDownload the Heavy Harrow brochure (PDF format)
The TOR-MASTER Heavy Harrow is designed for durability. The front section bars can be set individually for heavy straw conditions and for uniform working conditions. The front rows can be set at an angle so they do not get all the wear and tear. The TOR-MASTER Heavy Harrow has a down pressure system designed to take the pressure off the pulling point. Designed with extension spring to pull pressure down and forward and can be adjusted to down pressure in the tractor tracks if required. The sections are 5-bar with 6' or 8' sections with 5/8" by 30" long teeth. The U-joint design has 2" pins and a carbon steel bushing with a cavity for easy lubrication. It has a deep off set for sharp corners for transportation. The sections will not interfere in tight corners. The TOR-MASTER Heavy Harrow has adjustable height control for more uniform penetration for different application requirements. The height adjustment on the frame is used to level out the sections and is operated by a ratchet jack for durability. It is designed to be operated by hydraulic cylinder, if required, for less maintenance. The TOR-MASTER Heavy Harrow has a depth control adjustment to regulate the depth penetration for spring applications. This is a unique system because you can run it at 3" depth for softer conditions and uniformly at 2" and 3" on harder soil. It is designed to incorporate chemicals and to prepare a seed bed for uniform depth of soil conditions
FEATURES:
HARROW DRAW BAR FEATURES:
|
